Products

Swissbit SD Memory card & multimedia card

Swissbit’s industrial product lines of SD Memory Cards(SD) specifically designed, manufactured and tested to withstand extreme environmental conditions. The use of SLC (Single Level Cell) Flash combined with an optimized flash controller provides a number of enhanced product features such as built-in error correction, sophisticated wear leveling and bad block management algorithms, power loss protection and power saving modes. Special attention is dedicated to the mechanical stability and enhanced ESD protection. A high reliability housing with special connector support provides resistance against bending and torque. Furthermore, the gold plated SD Memory Card connectors will last a minimum of 10,000 insertions.

Features

Flash management mechanism Optimized error correction code
Efficient algorithms for bad block management
Real life time monitoring
Sophisticated wear leveling & bad block management
Power fail robustness
SD Memory card (SD/ SDHC ) S-200 / 220 Compliant with SDA 2.0 specification
Sophisticated wear leveling & bad block management
Life time monitoring over extended command set
Intelligent power fail protection & recovery
Multimedia card M-100 Compliant with MMC Specification
Sophisticated wear leveling & bad block management
Life time monitoring with extended command set
Intelligent power fail protection & recovery

Specification


USB Flash Module

USB FLASH DRIVE
Series S-200 / 220 M-100
Interface Compliance SDA 2.0, SDHC class 6 (10) MMC 3.31, 4.1 & 4.2
Connector SD MMC
Physical Form 32.0 x 24.0 x 2.1 mm 32.0 x 24.0 x 1.4 mm
Flash Type SLC SLC
Density 512 MB – 8 GB 128 MB, others on request
Operating Temperature Extended: -25°C to 85°C
Industrial: -40°C to 85°C
Extended: -25°C to 90°C
Industrial: -40°C to 90°C
Storage Temperature -40°C to 100°C -40°C to 100°C
Shock 1000 G 1000 G
Vibration 15 G 15 G
Humidity 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode SD, SPI 1 bit MMC, SPI
Performance Burst Rate up to 25 MB/s
Read Seq. up to 21 MB/s
Write Seq. up to 18 MB/s
(512 MB – 13 MB/s)
Burst Rate up to 6.5 MB/s
Read Seq. up to 5.7 MB/s
Write Seq. up to 5.9 MB/s
Voltage 2.7 – 3.6 V Normal
2.0 – 3.6 V Basic Communication
2.7 – 3.6 V Normal
2.0 – 3.6 V Basic Communication
Power Consumption RW typ 28 mA (max 60 mA)
Write typ 55 mA (max 90 mA)
Sleep max 0.3 mA
Read typ 9 mA (max 15mA)
Write typ 15 mA (max 20mA)
Sleep max 0.2 mA
Marking Swissbit, Density, CE, Pb free,
WEEE, Part Number, Lot Code,
Mfg. Date
Swissbit, Density, CE, Pb free,
WEEE, Part Number, Lot Code,
Mfg. Date
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale,
Gaming Industry, Automation Solutions, Telecommunication,
Measurement, Transportation, etc.
Tools Life Time Monitoring with SD / SPI command set
Part Number SFSDxxxxLvBNxss-t-dd-1r1-STD SFMMxxxxOvBNxss-t-dd-1r1-STD

Contact information