go site Products

Swissbit Micro SD Memory Card

Swissbit’s INDUSTRIAL product lines of SD Memory Cards(SD) specifically designed, manufactured and tested to withstand extreme environmental conditions. The use of SLC (Single Level Cell) Flash combined with an optimized flash controller provides a number of enhanced product features such as built-in error correction, sophisticated wear leveling and bad block management algorithms, power loss protection and power saving modes. Special attention is dedicated to the mechanical stability and enhanced ESD protection. A high reliability housing with special connector support provides resistance against bending and torque. Furthermore, the gold plated SD Memory Card connectors will last a minimum of 10,000 insertions.

Features

Falsh Management mechanism Optimized Error Correction Code
Efficient Algorithms for Bad Block Management
Real Life Time Monitoring
Sophisticated Wear Leveling & Bad Block Management
Power Fail Robustness
Micro SD Memory Card S-200μ Compliant with SDA2.0 Specification
Advanced Wear Leveling & Block Management
Power Fail Protection
Micro SD Memory Card S-200μ World‘s most reliable SLC Flash fitting MICRO SD
Compliant with SDA2.0 Specification
Sophisticated Wear Leveling & Bad Block Management
Life Time Monitoring over extended command set
Intelligent Power Fail Protection & Recovery

Specification


MICRO SD Memory Card (SD / SDHC)

MICRO SD Memory Card
Series S-300μ S-200μ
Interface Compliance SDA 2.0, SDHC class 6 / 10 SDA 2.0 class 6
Connector MICRO SD MICRO SD
Physical Form 15.0 x 11.0 x (0.7) 1 mm 15.0 x 11.0 x (0.7) 1 mm
Flash Type SLC 2x nm SLC 4x nm
Density 2 GB – 8 GB 512 MB – 2 GB
Operating Temperature Extended: -25°C to 85°C Extended: -25°C to 85°C
Industrial: -40°C to 85°C
Storage Temperature -40°C to 85°C -40°C to 100°C
Shock 1 500 G 1 500 G
Vibration 50 G 50 G
Humidity 93 % RH 40°C, 500 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode SD, SPI SD, SPI
Performance Burst Rate up to 25 MB/s
Read Seq. up to 24 MB/s
Write Seq. up to 22 MB/s
(2 GB – 12 MB/s)
Burst Rate up to 25 MB/s
Read Seq. up to 21 MB/s
Write Seq. up to 13 MB/s
Voltage 2.7 – 3.6 V Normal
2.0 – 3.6 V Basic Communication
2.7 – 3.6 V Normal
2.0 – 3.6 V Basic Communication
Power Consumption Read typ 50 mA
Write typ 50 mA
Sleep max 0.4 mA
RW typ 30 mA
Write typ 40 mA
Sleep max 0.4 mA
Marking Swissbit, Part Number, Lot
Code, Mfg. Date
Swissbit, Part Number,
Lot Code, Mfg. Date
Target Application Networking, Telecommunication,
Enterprise Computing, Measurement,
Point-of-Sale, etc.
Industrial Embedded Systems,
Medical Solutions, Point-of-Sale,
Gaming Industry,
Automation Solutions,
Telecommunication, Measurement, Transportation, etc.
Tools Life Time Monitoring with SD
/ SPI command set
Part Number SFSDxxxxNvBWxss-t-dd-1r1-STD  SFSDxxxxNxBNxss-t-dd-1r1-STD

Contact information